Component
| Outline
|
Transponder key ECU assembly
| - When a door control transmitter assembly is inserted into the ignition key cylinder, the transponder key ECU assembly checks if the key ID code received from the transponder key coil and registered key ID code match.
- When the engine is started, the transponder key ECU assembly checks if the engine ID codes stored in the ECM and transponder key ECU assembly match.
|
Transponder key coil
| When a door control transmitter assembly is inserted into the ignition key cylinder, the transponder key amplifier receives the key ID code from the transponder chip in the door control transmitter assembly grip and outputs it to the transponder key ECU assembly.
|
ECM
| The ECM receives key ID code verification results from the transponder key ECU assembly. The ECM also verifies the ECUs. Then judgment of whether to immobilise the engine is made.
|
Unlock warning switch assembly
| The unlock warning switch assembly detects if the door control transmitter assembly is in the ignition key cylinder and outputs the result to the transponder key ECU assembly.
|
Security indicator light (heater control switch board)
| Depending on the operation of the transponder key ECU assembly, the security indicator light comes on or starts blinking.
|