Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT (for TMC, TMMR Made)

BLOWER UNIT (for TMC, TMMR Made) > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY
(Click here)


2. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    E227191
  1. Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.



3. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    E227193
  1. Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.



4. REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for Dual Type)


    E228072
  1. Remove the heater packing as shown in the illustration.



    E228651
  1. Disconnect the 5 connectors.

  1. Disengage 7 clamps and remove the air conditioning harness assembly.



5. REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for 3 Zone Type)


    E228072
  1. Remove the heater packing as shown in the illustration.



    E228068
  1. Disconnect the 6 connectors.

  1. Disengage 7 clamps and remove the air conditioning harness assembly.



6. REMOVE BLOWER ASSEMBLY


    E179565
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the blower assembly.