Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT (for TMC, TMMR Made)

AIR CONDITIONING UNIT (for TMC, TMMR Made) > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    E227191
  1. Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.



2. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    E227193
  1. Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.



3. REMOVE COOLER THERMISTOR HOSE


    E234890
  1. Disengage the clamp and remove the cooler thermistor hose.



4. REMOVE ASPIRATOR


    E228071
  1. Disengage the 2 claws and remove the aspirator.



5. REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for Dual Type)


    E228072
  1. Remove the heater packing as shown in the illustration.



    E228651
  1. Disconnect the 5 connectors.

  1. Disengage 7 clamps and remove the air conditioning harness assembly.



6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for 3 Zone Type)


    E228072
  1. Remove the heater packing as shown in the illustration.



    E228068
  1. Disconnect the 6 connectors.

  1. Disengage 7 clamps and remove the air conditioning harness assembly.



7. REMOVE COOLER EXPANSION VALVE


    E228074
  1. Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.



8. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY


    E315356
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the air conditioning radiator assembly.



9. REMOVE DRAIN COOLER HOSE


    E228075
  1. Remove the drain cooler hose from the air conditioning radiator assembly.



10. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY


    E179580
  1. Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.



11. REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY


    E179568
  1. Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.



12. REMOVE NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for 3 Zone Type)


    E228080
  1. Remove the 4 screws and No. 3 air conditioning radiator damper servo sub-assembly.



13. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater)


    E230526
  1. Disengage the 2 clamps.



    E230527
  1. Remove the screw.

  1. Disengage the guide and remove the quick heater bracket.



    E230528
  1. Disengage the 2 clamps.



    E230529
  1. Remove the 2 screws.



    E230530
  1. Remove the quick heater assembly as shown in the illustration.



14. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    E228076
  1. Disengage the 3 claws and remove the heater clamp.



    E228077
  1. Remove the screw and clamp.



    E228078
  1. Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly as shown in the illustration.

    NOTICE:
    Prepare a drain pan or cloth in case the coolant leaks.



15. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    E179586
  1. Remove the 6 screws.

  1. Disengage the 5 claws and remove the plate cover.



    E179587
  1. Disengage the clamp and remove the No. 1 cooler evaporator sub-assembly with the No. 1 cooler thermistor.



    E167988
  1. Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.



16. REMOVE NO. 1 COOLER THERMISTOR


    E228572
  1. Remove the No. 1 cooler thermistor.