FRONT AXLE HUB > ON-VEHICLE INSPECTION |
| 1. REMOVE FRONT WHEEL |
| 2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY |
Remove the 2 bolts and separate the front disc brake caliper assembly.
| 3. REMOVE FRONT DISC |
![]() |
Put matchmarks on the front disc and the front axle hub.
| *a | Matchmark |
Remove the front disc.
| 4. INSPECT FRONT AXLE HUB BEARING LOOSENESS |
![]() |
Using a dial indicator, check for looseness near the center of the front axle hub.
| 5. INSPECT FRONT AXLE HUB RUNOUT |
![]() |
Using a dial indicator, check for runout on the surface of the front axle hub outside the hub bolts.
| 6. INSTALL FRONT DISC |
![]() |
Align the matchmarks of the front disc and front axle hub, and install the front disc.
| *a | Matchmark |
| 7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY |
Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.
| 8. INSTALL FRONT WHEEL |