REAR COMBINATION LIGHT ASSEMBLY (for TMC, TMMR Made) > DISASSEMBLY |
| 1. REMOVE REAR COMBINATION LIGHT PACKING |
![]() |
Remove the rear combination light packing.
| 2. REMOVE REAR COMBINATION LIGHT CORD |
![]() |
Disengage the clamp.
Disconnect the connector to remove the rear combination light cord.
| 3. REMOVE REAR TURN SIGNAL LIGHT BULB |
![]() |
Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration, to remove them as a unit.
Remove the rear turn signal light bulb from the rear turn signal light socket.
| 4. REMOVE REAR BUMPER UPPER SIDE RETAINER |
![]() |
Using a screwdriver, disengage the claw and remove the rear bumper upper side retainer as shown in the illustration.