Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM (w/ Occupant Classification System)

SEAT BELT WARNING SYSTEM (w/ Occupant Classification System) > SYSTEM DESCRIPTION

for Preparation Click here



SEAT BELT WARNING SYSTEM DESCRIPTION
  1. Driver seat belt warning light:
    The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.

  2. Front passenger seat belt warning light:
    The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the passenger seat belt state, vehicle speed, shift lever position and parking brake state.

  3. Seat belt warning buzzer:
    After turning the ignition switch to ON, if the driver seat belt is not fastened within 1.8 seconds, check that the seat belt warning buzzer in the combination meter assembly sounds at 1.2 second intervals for 6 seconds.
    When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds once.
    When 30 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 9.6 seconds.
    After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 20 seconds.


FUNCTION OF MAIN COMPONENTS

Component
Function
Front seat inner belt assembly LH
Informs the airbag sensor assembly of the driver seat belt condition (fastened or unfastened).
Front seat inner belt assembly RH
Informs the occupant detection ECU of the front passenger seat belt condition (fastened or unfastened).
Occupant classification sensor front/rear
Informs the occupant detection ECU of the front passenger seat condition (occupied or unoccupied).
Occupant detection ECU
Sends the front passenger seat belt buckle switch signal and occupant detection signal to the airbag sensor assembly.
Airbag sensor assembly
  1. Sends the driver seat belt buckle switch signal to the main body ECU (multiplex network body ECU) via CAN communication.
  2. Sends the front passenger seat belt buckle switch signal to the combination meter assembly via CAN communication.
Parking brake switch assembly
Informs the main body ECU (multiplex network body ECU) of the parking brake condition.
Main body ECU (multiplex network body ECU)
Sends the driver seat belt buckle switch signal and parking brake switch signal to the combination meter assembly via CAN communication.
Skid control ECU
Sends the vehicle speed signal to the combination meter assembly via CAN communication.
ECM
Sends the shift position signal to the combination meter assembly via CAN communication.