WASHER LEVEL WARNING SWITCH > INSTALLATION |
| 1. INSTALL LEVEL WARNING SWITCH ASSEMBLY |
![]() |
Install the level warning switch assembly as shown in the illustration.
Connect the connector.
![]() |
Connect the washer hose to the windshield washer motor and pump assembly.
| 2. ADD WASHER FLUID |
Add washer fluid to the washer jar.
| 3. INSTALL FRONT FENDER LINER RH |
for TMC, TMMR Made:
Install the front fender liner RH with the 4 clips and 5 screws.
Install 2 new grommets.
![]() |
Install the pin hold clip as shown in the illustration.
| *1 | Clip |
| *2 | Pin Hold Clip |
| *a | Correct |
| *b | Incorrect |
Install the clip.
for TMMK Made:
Install the front fender liner RH with the 4 clips.
Install 3 new grommets.
Install the 5 screws and bolt.
![]() |
Install the pin hold clip as shown in the illustration.
| *1 | Clip |
| *2 | Pin Hold Clip |
| *a | Correct |
| *b | Incorrect |
Install the clip.
| 4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH |
for TMC, TMMR Made:
Install the front wheel opening extension pad RH with the 3 screws.
for TMMK Made:
Install the front wheel opening extension pad RH with the 3 screws.
| 5. INSTALL FRONT WHEEL RH |