Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR (for TMC, TMMR Made)

INNER REAR VIEW MIRROR (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here



1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)


    B287085E01
  1. Slide the inner rear view mirror assembly in the direction indicated by the arrow in the illustration to install it.
    Text in Illustration 
    *1
    Lock Lever

    NOTICE:
    Confirm that the lock lever is surely installed.

  1. Engage the 2 claws to install the inner mirror base cover.



2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
  1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

    Torque:
    1.8 N*m{ 18 kgf*cm , 16 in.*lbf }

  1. Connect the connector.



3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


  1. except TMMR Made:

    1. Engage the 6 claws and temporarily install the inner rear view mirror stay holder cover.



    2. B281436
    3. Slide the inner rear view mirror stay holder cover in the direction indicated by arrow shown in the illustration and engage the 2 claws to install the cover.



  1. for TMMR Made:

    1. Engage the 2 claws to temporarily install the inner rear view mirror stay holder cover.



    2. B380968
    3. Slide the inner rear view mirror stay holder cover in the direction indicated by arrow shown in the illustration to engage the 2 guides and install the cover.