Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR (for TMMK Made)

INNER REAR VIEW MIRROR (for TMMK Made) > INSTALLATION

for Preparation Click here



1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)


    E314346
  1. Slide the inner rear view mirror assembly as shown in the illustration.

  1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

    Torque:
    1.5 N*m{ 15 kgf*cm , 13 in.*lbf }



2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)


    E314347
  1. Slide the inner rear view mirror assembly as shown in the illustration.

  1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

    Torque:
    1.5 N*m{ 15 kgf*cm , 13 in.*lbf }

  1. Connect the connector.



3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
  1. Engage the 2 claws.



    E314348
  1. Slide the inner rear view mirror stay holder cover and engage the 2 guides to install as shown in the illustration.