ULTRASONIC SENSOR (for Rear Side) > REMOVAL |
| 1. REMOVE REAR BUMPER ASSEMBLY |
| 2. REMOVE NO. 2 LUGGAGE ROOM WIRE |
![]() |
Disengage the clamp.
Disconnect the connector to remove the No. 2 luggage room wire.
| 3. REMOVE ULTRASONIC SENSOR CLIP |
![]() |
Disengage the 4 claws to remove the ultrasonic sensor clip.
| 4. REMOVE NO. 1 ULTRASONIC SENSOR |
![]() |
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
| 5. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER |
![]() |
Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.