Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER (for TMMK Made)

INSTRUMENT PANEL SPEAKER (for TMMK Made) > INSTALLATION

for Preparation Click here


NOTICE:
for Side:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)

NOTICE:
Do not touch the speaker cone.

  1. Connect the connector.



    E300881E01
  1. Install the front No. 3 speaker assembly with the 2 screws.

    HINT:
    Install the screws in the order shown in the illustration.



2. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (for 10 Speakers)
  1. Connect the connector.

  1. Engage the clamp.



    B377625
  1. Engage the 11 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.



3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

NOTICE:
Do not touch the speaker cone.

  1. Connect the connector.



    E301596E01
  1. Install the front No. 2 speaker assembly with the 2 screws.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side

    HINT:
    Install the screws in the order shown in the illustration.



4. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    B280307
  1. Engage the 2 guides.

  1. Engage the 3 claws and 2 clips to install the No. 1 instrument panel speaker panel sub-assembly.



5. INSTALL FRONT PILLAR GARNISH
  1. Remove the protective cover.

  1. Install a new clips to the front pillar garnish LH.



    B379545
  1. Install a new front pillar garnish clip to front pillar garnish LH.

    HINT:
    Engage the front pillar garnish clip so that it is oriented as shown in the illustration.

  1. Engage the 2 guides as shown in the illustration.



    B379546
  1. Engage the front pillar garnish clip and clip to install the front pillar garnish LH.



6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LH side:
for RH side: