Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY LH (for TMMK Made)
for Manual Seat: (Click here)
for Power Seat: (Click here)


2. REMOVE FRONT SEAT ASSEMBLY LH (for TMC, TMMR Made)
for Manual Seat: (Click here)
for Power Seat: (Click here)


3. REMOVE AUDIO AMPLIFIER COVER


    E223732
  1. Using a clip remover, remove the 2 clips and audio amplifier cover.



4. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    E223733
  1. Remove the bolt and disconnect the ground wire.

  1. Disconnect each connector and disengage the clamp.



    E223734
  1. Remove the bolt.

  1. Disengage the 2 guides and remove the stereo component amplifier assembly with bracket.



5. REMOVE NO. 2 AMPLIFIER BRACKET


    E223735
  1. Remove the 2 screws and No. 2 amplifier bracket.



6. REMOVE NO. 1 AMPLIFIER BRACKET


    E223736
  1. Remove the 2 screws and No. 1 amplifier bracket.



7. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY