RADIO RECEIVER (for TMMK Made) > INSTALLATION |
| 1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY |
| 2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
Engage the 2 clips to install the air conditioning control assembly.
| 3. INSTALL NO. 1 RADIO RECEIVER BRACKET |
Install the No. 1 radio receiver bracket with the 5 screws.
| 4. INSTALL NO. 2 RADIO RECEIVER BRACKET |
Install the No. 2 radio receiver bracket with the 5 screws.
| 5. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY |
Connect each connector.
Engage the 4 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.
Install the radio receiver assembly with air conditioning control assembly with the 4 bolts and 2 screws.
| 6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the guide and 2 clips as shown in the illustration.
Install the upper console panel sub-assembly with the 2 screws <C> or <D>.
| 7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY |
Connect the connector.
Engage the clamp.
![]() |
Engage the 11 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.
| 8. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Engage the 6 clips.
Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.
Connect the connector.
Move the shift lever to P.
| 9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.
![]() |
Engage the 2 claws as shown in the illustration.
| 10. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY |
w/ Seat Heater System:
Connect each connector.
Engage the 4 clips to install the upper console box sub-assembly.