Home › Engine / Hybrid System ยท 2AR-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
  1. Engage the 2 claws to install the ignition or starter switch assembly.



2. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY
  1. Secure the steering column assembly in a vise.



    C239334
  1. Temporarily install the steering column upper with switch bracket assembly to the steering column assembly with 2 new tapered-head bolts.

  1. Tighten the 2 tapered-head bolts until the bolt heads break off.



3. INSTALL STEERING COLUMN ASSEMBLY
(Click here).