OUTER REAR VIEW MIRROR GLASS (for TMMK Made) > REMOVAL |
| 1. REMOVE OUTER MIRROR |
![]() |
Apply protective tape to the area shown in the illustration.
| *a | Protective Tape |
Push the upper part of the mirror surface and tilt it.
Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror as shown in the illustration.
![]() |
Apply protective tape to the area shown in the illustration.
| *a | Protective Tape |
Push the lower part of the mirror surface and tilt it.
Using a moulding remover, disengage the 2 claws at the upper part of the outer mirror as shown in the illustration.
Remove the outer mirror.