Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH (for TMC, TMMR Made)

HEADLIGHT DIMMER SWITCH (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
  1. Engage the 3 claws to install the headlight dimmer switch assembly.

  1. Connect the connector.



2. INSTALL TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)
  1. Engage the claw to install the tilt and telescopic switch.

  1. Connect the connector.



3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E227467
  1. Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

  1. Connect each connector.



4. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
(Click here)