HEADLIGHT DIMMER SWITCH (for TMC, TMMR Made) > REMOVAL |
| 1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY |
| 2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
![]() |
Disconnect each connector.
Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.
| 3. REMOVE TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column) |
![]() |
Disconnect the connector.
Disengage the claw and pull out the tilt and telescopic switch.
| 4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY |
![]() |
Disconnect the connector.
Using a screwdriver, disengage the 3 claws and remove the headlight dimmer switch assembly.