ENGINE HOOD COURTESY SWITCH > INSPECTION |
| 1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) |
Measure the resistance according to the value(s) in the table below.

| *A | for LHD | *B | for RHD |
| *1 | Opened | *2 | Locked |
| *a | Component without harness connected (Engine Hood Courtesy Switch (Hood Lock Assembly)) | - | - |
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 2 | Opened | 10 kΩ or higher |
| 1 - 2 | Locked | Below 1 Ω |