Home › Engine / Hybrid System ยท 6AR-FSE › EMISSION CONTROL › PCV VALVE

PCV VALVE > INSPECTION

for Preparation Click here



1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
  1. Install a clean hose to the PCV valve (ventilation valve sub-assembly).



  1. Check PCV valve (ventilation valve sub-assembly) operation.



      A304956E02
    1. Blow air into the cylinder head cover sub-assembly side, and check that air passes through easily.
      Text in Illustration 
      *a
      Hose
      *b
      Air
      V100135
      Cylinder Head Cover Sub-assembly Side

      CAUTION:
      Do not suck air through the valve.
      Petroleum substances inside the valve are hazardous to your health.

      If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).



    2. A304957E02
    3. Blow air into the intake manifold side, and check that air passes through with difficulty.
      Text in Illustration 
      *a
      Hose
      *b
      Air
      V100135
      Intake Manifold Side

      CAUTION:
      Do not suck air through the valve.
      Petroleum substances inside the valve are hazardous to your health.

      If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

  1. Remove the hose from the PCV valve (ventilation valve sub-assembly).