PCV VALVE > REMOVAL |
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
![]() |
Hold the front of the V-bank cover sub-assembly and raise it to disengage the 2 retainers on the front of the V-bank cover sub-assembly. Continue to raise the V-bank cover sub-assembly to disengage the retainer on the rear of the V-bank cover sub-assembly and remove the V-bank cover sub-assembly.
| 2. REMOVE VENTILATION VALVE SUB-ASSEMBLY |
![]() |
Disconnect the ventilation hose from the ventilation valve sub-assembly.
![]() |
Using a 19 mm deep socket wrench, remove the ventilation valve sub-assembly.