Home › Engine / Hybrid System ยท 6AR-FSE › EMISSION CONTROL › PCV VALVE

PCV VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A338523
  1. Disengage the 3 grommets to remove the No. 1 engine cover sub-assembly.

    NOTICE:
    When removing the No. 1 engine cover sub-assembly, make sure to lift it upward. Pulling the No. 1 engine cover sub-assembly towards you may damage the No. 1 engine cover sub-assembly.



2. DISCONNECT NO. 2 VENTILATION HOSE


    A338746
  1. Slide the clip and disconnect the No. 2 ventilation hose from the PCV valve (ventilation valve sub-assembly).



3. REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)


    A338747
  1. Using a 19 mm deep socket wrench, remove the PCV valve (ventilation valve sub-assembly) from the cylinder head cover sub-assembly.