Home › General › SPECIFICATIONS › 6AR-FSE FUEL

6AR-FSE FUEL > SERVICE DATA



Fuel pressure
Standard fuel pressure
196 to 588 kPa (2.0 to 6.0 kgf/cm2, 28 to 85 psi
Standard fuel pressure (for high pressure)
3500 to 4500 kPa (35.7 to 45.9 kgf/cm2, 508 to 653 psi)
Fuel pressure: for 5 minutes after engine has stopped
Standard fuel pressure
147 kPa (1.5 kgf/cm2, 21 psi) or more
Port fuel injector assembly
Standard resistance
11.6 to 12.4 Ω at 20°C (68°F)
Standard injection volume
54 to 65 cc (3.3 to 4.0 cu. in.) per 15 seconds
Difference between each fuel injector assembly
11 cc (0.7 cu. in.) or less
Standard fuel drop
1 drop or less per 14 minutes
Direct fuel injector assembly
Standard resistance
1.74 to 2.04 Ω at 20°C (68°F)
Fuel pump
Standard resistance
0.2 to 3.0 Ω at 20°C (68°F)
Fuel pump with seal sub-assembly
Standard resistance
0.5 Ω at 20°C (68°F)
Fuel sender gauge assembly
Standard resistance
13.5 to 16.5 Ω(Float level F)
13.5 to 414.5 Ω(Float level E to F)
405.5 to 414.5 Ω(Float level E)