Home › Drivetrain ยท U660E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE LOWER POSITION INDICATOR HOUSING


    C239455
  1. Disengage the 5 claws and remove the lower position indicator housing.



2. REMOVE SHIFT LOCK RELEASE BUTTON (Lower Shift Lever Assembly Side)


    C239456
  1. Disengage the 2 claws and remove the shift lock release button and shift lock release spring.



3. REMOVE SHIFT POSITION INDICATOR


    C239457
  1. Remove the 4 screws and shift position indicator from the rear console upper panel sub-assembly.



4. REMOVE SHIFT LOCK RELEASE BUTTON (Shift Position Indicator Side)


    C240493
  1. Disengage the 2 claws and remove the position indicator plate.



    C240494
  1. Disengage the claw and remove the shift lock release button and shift lock release spring.



5. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C239460
  1. Separate the bulb socket, 2 guides and clamp, and remove the indicator light wire sub-assembly from the upper position indicator housing.

  1. Remove the bulb from the indicator light wire sub-assembly.

  1. Remove the cap from the bulb.



6. REMOVE POSITION INDICATOR SLIDE COVER


    C239462
  1. Remove the position indicator slide cover from the upper position indicator housing.



7. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER


    C239463
  1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.



8. REMOVE UPPER POSITION INDICATOR HOUSING


    C239464
  1. Disengage the 4 claws and remove the position indicator lens.