Home › Drivetrain ยท U761E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE LOWER POSITION INDICATOR HOUSING


    C239455
  1. Disengage the 5 claws to remove the lower position indicator housing.



2. REMOVE SHIFT LOCK RELEASE BUTTON (Lower Shift Lever Assembly Side)


    C239456
  1. Disengage the 2 claws to remove the shift lock release button and shift lock release spring.



3. REMOVE SHIFT POSITION INDICATOR


    C240492
  1. Remove the 4 screws and shift position indicator from the rear console upper panel sub-assembly.



4. REMOVE SHIFT LOCK RELEASE BUTTON (Shift Position Indicator Side)


    C240493
  1. Disengage the 2 claws to remove the position indicator plate from the upper position indicator housing.



    C240494
  1. Disengage the claw to remove the shift lock release button and shift lock release spring from the upper position indicator housing.



5. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C239460E01
  1. Turn the bulb socket as shown in the illustration to disconnect it.
    Text in Illustration 
    *a
    Clamp
    *b
    Bulb Socket
    *c
    Guide

  1. Disengage the 2 guides and clamp and remove the indicator light wire sub-assembly from the upper position indicator housing.

  1. Remove the bulb from the indicator light wire sub-assembly.

  1. Remove the cap from the bulb.



6. REMOVE POSITION INDICATOR SLIDE COVER


    C239462
  1. Remove the position indicator slide cover from the upper position indicator housing.



7. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER


    C239463
  1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.



8. REMOVE POSITION INDICATOR LENS


    C239464
  1. Disengage the 4 claws to remove the position indicator lens from the upper position indicator housing.