SHIFT LEVER > REASSEMBLY |
| 1. INSTALL UPPER POSITION INDICATOR HOUSING |
![]() |
Engage the 4 claws to install the position indicator lens.
| 2. INSTALL NO.2 POSITION INDICATOR SLIDE COVER |
![]() |
Install the No. 2 position indicator slide cover to the position indicator slide cover.
| 3. INSTALL POSITION INDICATOR SLIDE COVER |
![]() |
Install the position indicator slide cover to the upper position indicator housing.
| 4. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
Install the cap to the bulb.
Install the bulb to the indicator light wire sub-assembly.
![]() |
Connect the 2 guides, clamp and bulb socket to install the indicator light wire sub-assembly to the upper position indicator housing.
| 5. INSTALL SHIFT LOCK RELEASE BUTTON (Shift Position Indicator Side) |
![]() |
Engage the claw to install the shift lock release button with the shift lock release spring.
![]() |
Engage the 2 claws to install the position indicator plate.
| 6. INSTALL SHIFT POSITION INDICATOR |
![]() |
Install the shift position indicator with the 4 screws in the sequence shown in the illustration to the rear console upper panel sub-assembly.
| 7. INSTALL SHIFT LOCK RELEASE BUTTON (Lower Shift Lever Assembly Side) |
![]() |
Engage the 2 claws to install the shift lock release button with the shift lock release spring.
| 8. INSTALL LOWER POSITION INDICATOR HOUSING |
![]() |
Engage the 5 claws to install the lower position indicator housing.