STEREO JACK ADAPTER ASSEMBLY (for TMMK Made) > INSTALLATION |
| 1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY |
Engage the 2 claws to install the No. 1 stereo jack adapter assembly.
| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the guide and 2 clips as shown in the illustration.
Install the upper console panel sub-assembly with the 2 screws <C> or <D>.
| 3. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Engage the 6 clips.
Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.
Connect the connector.
Move the shift lever to P.
| 4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.
![]() |
Engage the 2 claws as shown in the illustration.
| 5. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY |
w/ Seat Heater System:
Connect each connector.
Engage the 4 clips to install the upper console box sub-assembly.