Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO JACK ADAPTER ASSEMBLY (for TMMK Made)

STEREO JACK ADAPTER ASSEMBLY (for TMMK Made) > REMOVAL

for Preparation Click here



1. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    B377618
  1. Disengage the 4 clips and remove the upper console box sub-assembly.

  1. w/ Seat Heater System:

    1. Disconnect each connector.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B377615
  1. Disengage the 2 claws as shown in the illustration.



    B377616
  1. Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.



3. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Move the shift lever to N.



    B403737
  1. Disconnect the connector.

  1. Remove the 2 screws <C> or <D>.



    B377620
  1. Disengage the 6 clips and remove the rear console upper panel sub-assembly.



4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B403738
  1. Remove the 2 screws <C> or <D>.



    B377622
  1. Disengage the 2 clips and guide as shown in the illustration.

  1. Disconnect each connector to remove the upper console panel sub-assembly.



5. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    E300883
  1. Disengage the 2 claws to remove the No. 1 stereo jack adapter assembly.