LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH > INSPECTION |
| 1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 2 (E) - 3 (UL) | Luggage door opening switch assembly not pushed | 10 kΩ or higher |
| 2 (E) - 3 (UL) | Luggage door opening switch assembly pushed | Below 1 Ω |
| *a | Component without harness connected (Luggage Door Opening Switch Assembly) |