FRONT SEATBACK HEATER (for TMC, TMMR Made Manual Seat) > INSTALLATION |
| 1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
Temporarily install the separate type front seatback cover with pad.
Engage the 4 claws to install the 2 front seat headrest supports.
Install the 2 brackets with the nut.
![]() |
Turn back the separate type front seatback cover.
Using hog ring pliers, install the 2 new hog rings.
![]() |
Using hog ring pliers, install 3 new hog rings.
![]() |
Using hog ring pliers, install 5 new hog rings.
Engage the clamp.
Connect the connector.
| 3. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side) |
Engage the 5 claws and 6 guides to install the front seat inner cushion shield.
| 4. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side) |
Engage the 5 claws and 7 guides to install the front seat inner cushion shield.
| 5. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side) |
Engage the 5 claws, 6 guides and clip to install the front seat cushion shield.
Install the screw.
| 6. INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side) |
Engage the 5 claws, 7 guides and clip to install the front seat cushion shield.
Install the screw.
| 7. CONNECT SEPARATE TYPE FRONT SEATBACK COVER |
Connect the rubber band of the separate type front seatback cover.
| 8. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side) |
Install the vertical adjusting handle with the screw.
| 9. INSTALL RECLINING ADJUSTER RELEASE HANDLE |
Engage the claw to install the reclining adjuster release handle.
| 10. INSTALL FRONT SEAT ASSEMBLY |