Home › Vehicle Interior › LIGHTING (INT) › FRONT DOOR COURTESY SWITCH (for TMMK Made)

FRONT DOOR COURTESY SWITCH (for TMMK Made) > INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    B203492E08
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - Switch body
    Not pushed (ON)
    Below 1 Ω
    Pushed (OFF)
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Front Door Courtesy Light Switch Assembly)
    *1
    Switch Body
    If the result is not as specified, replace the front door courtesy light switch assembly.