HAZARD WARNING SWITCH (for TMC, TMMR Made) > INSPECTION |
| 1. INSPECT AIR CONDITIONING CONTROL ASSEMBLY (HAZARD SWITCH) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 4 (HAZ) - 6 (GND) | Hazard switch off | 10 kΩ or higher |
| Hazard switch on | Below 1 Ω |
| *a | Component without harness connected (Air Conditioning Control Assembly (Hazard Switch)) |