Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY

FRONT TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT TURN SIGNAL LIGHT ASSEMBLY LH


    E301266E01
  1. Apply battery voltage to the front turn signal light assembly LH and check that the light comes on.

    OK:
    Battery Connection
    Condition
    Specified Condition
    Battery positive (+) → 1 (B)
    Battery negative (-) → 4 (E)
    Always
    Clearance light comes on
    Battery positive (+) → 2 (B)
    Battery negative (-) → 4 (E)
    Always
    Daytime running light comes on
    Battery positive (+) → 5 (TRNL)
    Battery negative (-) → 4 (E)
    Daytime running light illuminated
    Daytime running light turns off

    Text in Illustration 
    *a
    Component without harness connected
    (Front Turn Signal Light Assembly LH)
    If the result is not as specified, replace the front turn signal light assembly LH.



2. INSPECT FRONT TURN SIGNAL LIGHT ASSEMBLY RH


    E301266E02
  1. Apply battery voltage to the front turn signal light assembly RH and check that the light comes on.

    OK:
    Battery Connection
    Condition
    Specified Condition
    Battery positive (+) → 1 (B)
    Battery negative (-) → 4 (E)
    Always
    Clearance light comes on
    Battery positive (+) → 2 (B)
    Battery negative (-) → 4 (E)
    Always
    Daytime running light comes on
    Battery positive (+) → 5 (TRNR)
    Battery negative (-) → 4 (E)
    Daytime running light illuminated
    Daytime running light turns off

    Text in Illustration 
    *a
    Component without harness connected
    (Front Turn Signal Light Assembly RH)
    If the result is not as specified, replace the front turn signal light assembly RH.