Home › Vehicle Interior › LIGHTING (INT) › FOOTWELL LIGHT

FOOTWELL LIGHT > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    E151728E31
  1. Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

  1. Check that the footwell light comes on.

    OK:
    Comes on

    Text in Illustration 
    *a
    Component without harness connected
    (Footwell Light (No. 1 Interior Illumination Light Assembly))
    If the result is not as specified, replace the No. 1 interior illumination light assembly.