Home › Engine / Hybrid System ยท 2GR-FE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK COOLING FAN MOTOR


    A255683E01
  1. Check that the motor operates smoothly when the battery is connected to the fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (Cooling Fan Motor)

  1. Measure the current while the motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    Cooling fan motor
    Battery voltage applied at 20°C (68°F)
    7.3 to 9.3 A

    If the result is not as specified, replace the cooling fan motor.



2. CHECK NO. 2 COOLING FAN MOTOR


    A255684E01
  1. Check that the motor operates smoothly when the battery is connected to the fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 Cooling Fan Motor)

  1. Measure the current while the motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    No. 2 Cooling fan motor
    Battery voltage applied at 20°C (68°F)
    7.3 to 9.3 A

    If the result is not as specified, replace the No. 2 cooling fan motor.