Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > CD/DVD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
END (DISC IS FAULTY)
OK


2.CHECK DISC


    I100151
  1. Check the disc.

    OK:
    The disc is clean.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN DISC
OK


3.REPLACE DISC AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END (DISC WAS FAULTY) 

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check the radio and display receiver assembly installation condition.

    1. Check that the radio and display receiver assembly is properly installed.

      OK:
      The radio and display receiver assembly is properly installed.



NG
REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)