Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > Disc cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK OPERATION
  1. Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.

    OK:
    Disc is ejected.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK


2.REPLACE DISC AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Disc is ejected.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK

END (DISC WAS FAULTY)