Home › Brake › PARKING BRAKE › PARKING BRAKE PEDAL (for LHD)

PARKING BRAKE PEDAL (for LHD) > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for TMMK Made)


    C239385
  1. Pull up the parking brake pedal claw.

    NOTICE:
    Do not damage the No. 1 parking brake cable assembly.



    C239384
  1. Remove the adjusting nut.



    C239386
  1. Remove the clip from the No. 1 parking brake cable assembly.

  1. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.



2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for TMC, TMMR Made)


    C239385
  1. Pull up the parking brake pedal claw.

    NOTICE:
    Do not damage the No. 1 parking brake cable assembly.



    C239384
  1. Remove the adjusting nut.



    C239386
  1. Remove the clip from the No. 1 parking brake cable assembly.

  1. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.



3. REMOVE PARKING BRAKE SWITCH ASSEMBLY


    C239394
  1. Remove the screw and parking brake switch assembly from the parking brake control pedal assembly.



4. REMOVE PARKING PEDAL PAD
  1. Remove the parking pedal pad from the parking brake pedal assembly.