WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Entry and Start System) > REGISTRATION |
| 1. REGISTRATION OF RECOGNITION CODE (USING INTELLIGENT TESTER) |
Connect an intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Wireless Code Registration.
Press both LOCK and UNLOCK switches within 1 to 1.5 seconds.
Press either switch for more than 1 second within 3 seconds.
Check the response to the registration completion.

Perform either of the following to complete the registration of recognition codes: