REAR SEAT ASSEMBLY (for TMC, TMMR Made Fold Down Seat Type) > REMOVAL |
| 1. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 2. REMOVE REAR SEATBACK ASSEMBLY LH |
Disconnect the rear seat outer belt assembly from the rear seat center shoulder belt guide.
Fold down the rear seatback assembly LH.
![]() |
Disengage the fastener as shown in the illustration.
| *1 | Fastener |
w/o Seat Heater System:
![]() |
Remove the 2 bolts and rear seatback assembly LH.
w/ Seat Heater System:
![]() |
Remove the 2 bolts and disconnect the rear seatback assembly LH.
![]() |
Disconnect the connector.
Disengage the clamp and remove the rear seatback assembly LH.
| 3. REMOVE REAR SEATBACK ASSEMBLY RH |
Fold down the rear seatback assembly RH.
![]() |
Disengage the fastener as shown in the illustration.
| *1 | Fastener |
w/o Seat Heater System:
![]() |
Remove the 2 bolts and rear seatback assembly RH.
w/ Seat Heater System:
![]() |
Remove the 2 bolts and disconnect the rear seatback assembly RH.
![]() |
Disconnect the connector.
Disengage the clamp and remove the rear seatback assembly RH.
| 4. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.
| a | 100 mm (3.94 in.) or less |
w/ Seat Heater System:
Disconnect the connector.
![]() |
Disengage the 2 clamps.
Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.
| 5. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.
| 6. REMOVE REAR SIDE SEATBACK ASSEMBLY LH |
Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide LH.
![]() |
Remove the bolt.
Disengage the hook and remove the rear side seatback assembly LH.
| 7. REMOVE REAR SIDE SEATBACK ASSEMBLY RH |
Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide RH.
![]() |
Remove the bolt.
Disengage the hook and remove the rear side seatback assembly RH.