Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER (for Fold Down Seat Type)

REAR SEAT CUSHION HEATER (for Fold Down Seat Type) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT HEADREST ASSEMBLY


2. REMOVE REAR SEATBACK ASSEMBLY LH
  1. Disconnect the rear seat outer belt assembly from the rear seat center shoulder belt guide.

  1. Fold down the rear seatback assembly LH.



    B383044E01
  1. Disengage the fastener as shown in the illustration.
    Text in Illustration 
    *1
    Fastener



  1. w/o Seat Heater System:



      B383045
    1. Remove the 2 bolts and rear seatback assembly LH.

      NOTICE:
      Be careful not to damage the vehicle body.



  1. w/ Seat Heater System:



      B383045
    1. Remove the 2 bolts and disconnect the rear seatback assembly LH.



    2. B383047
    3. Disconnect the connector.

    4. Disengage the clamp and remove the rear seatback assembly LH.

      NOTICE:
      Be careful not to damage the vehicle body.



3. REMOVE REAR SEATBACK ASSEMBLY RH
  1. Fold down the rear seatback assembly RH.



    B281552E01
  1. Disengage the fastener as shown in the illustration.
    Text in Illustration 
    *1
    Fastener



  1. w/o Seat Heater System:



      B281553
    1. Remove the 2 bolts and rear seatback assembly RH.

      NOTICE:
      Be careful not to damage the vehicle body.



  1. w/ Seat Heater System:



      B281553
    1. Remove the 2 bolts and disconnect the rear seatback assembly RH.



    2. B383048
    3. Disconnect the connector.

    4. Disengage the clamp and remove the rear seatback assembly RH.

      NOTICE:
      Be careful not to damage the vehicle body.



4. REMOVE REAR SEAT CUSHION ASSEMBLY


    B383050E01
  1. Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.
    Standard Measurement 
    a
    100 mm (3.94 in.) or less

    NOTICE:
    Be sure to hold the part of the rear seat cushion assembly directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the rear seat cushion assembly may deform the rear seat cushion frame.



  1. w/ Seat Heater System:

    1. Disconnect the connector.



    2. B384060
    3. Disengage the 2 clamps.

  1. Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



5. REMOVE REAR SEAT CUSHION LOCK HOOK


    B393387
  1. Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.

    NOTICE:
    Rear seat cushion lock hooks must not be reused.

    HINT:
    Use the same procedure for the RH side and LH side.



6. REMOVE BENCH TYPE REAR SEAT CUSHION COVER (REAR SEAT CUSHION HEATER SUB-ASSEMBLY)


  1. Remove the 48 hog rings.


    B384072



  1. Remove the 24 hog rings and bench type rear seat cushion cover (rear seat cushion heater sub-assembly) from the bench type rear seat cushion pad.


    B384073