HORN > REMOVAL |
| 1. REMOVE COOL AIR INTAKE DUCT SEAL |
| 2. REMOVE LOW PITCHED HORN ASSEMBLY |
for TMC, TMMR Made:
![]() |
Disconnect the connector.
Remove the bolt and low pitched horn assembly.
for TMMK Made:
![]() |
Disconnect the connector.
Remove the bolt and low pitched horn assembly.
| 3. REMOVE HIGH PITCHED HORN ASSEMBLY |
for TMC, TMMR Made:
![]() |
Disconnect the connector.
Remove the bolt and high pitched horn assembly.
for TMMK Made:
![]() |
Disconnect the connector
Remove the bolt and high pitched horn assembly.