Home › Vehicle Interior › SEAT › POWER SEAT SWITCH (for TMMK Made)

POWER SEAT SWITCH (for TMMK Made) > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT SWITCH LH


B239569E06
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *1
    Front Vertical Switch
    *2
    Slide Switch
    *3
    Lifter Switch
    *4
    Reclining Switch
    *a
    Component without harness connected
    (Front Power Seat Switch LH)

    Standard Resistance:
    Slide Switch 
    Tester Connection
    Condition
    Specified Condition
    5 - 7
    5 - 8
    Front
    Below 1 Ω
    2 - 11
    2 - 12
    5 - 11
    5 - 12
    Off
    2 - 11
    2 - 12
    5 - 11
    5 - 12
    Rear
    2 - 7
    2 - 8
    Front Vertical Switch 
    Tester Connection
    Condition
    Specified Condition
    1 - 7
    1 - 8
    Up
    Below 1 Ω
    6 - 11
    6 - 12
    1 - 11
    1 - 12
    Off
    6 - 11
    6 - 12
    1 - 11
    1 - 12
    Down
    6 - 7
    6 - 8
    Lifter Switch 
    Tester Connection
    Condition
    Specified Condition
    3 - 7
    3 - 8
    Up
    Below 1 Ω
    4 - 11
    4 - 12
    3 - 11
    3 - 12
    Off
    4 - 11
    4 - 12
    3 - 11
    3 - 12
    Down
    4 - 7
    4 - 8
    Reclining Switch 
    Tester Connection
    Condition
    Specified Condition
    10 - 7
    10 - 8
    Front
    Below 1 Ω
    9 - 11
    9 - 12
    10 - 11
    10 - 12
    Off
    9 - 11
    9 - 12
    10 - 11
    10 - 12
    Rear
    9 - 7
    9 - 8

    If the result is not as specified, replace the front power seat switch LH.



2. INSPECT FRONT POWER SEAT SWITCH RH


B279913E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *1
    Slide Switch
    *2
    Reclining Switch
    *a
    Component without harness connected
    (Front Power Seat Switch RH)

    Standard Resistance:
    Slide Switch 
    Tester Connection
    Condition
    Specified Condition
    2 - 13
    Front
    Below 1 Ω
    5 - 10
    2 - 10
    Off
    5 - 10
    2 - 10
    Rear
    5 - 13
    Reclining Switch 
    Tester Connection
    Condition
    Specified Condition
    11 - 13
    Front
    Below 1 Ω
    12 - 10
    11 - 10
    Off
    12 - 10
    11 - 10
    Rear
    12 - 13

    If the result is not as specified, replace the front power seat switch RH.