OIL PUMP > REASSEMBLY |
| 1. INSTALL FRONT OIL PUMP OIL SEAL |
![]() |
Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.
| *a | Depth |
Coat the lip of the front oil pump oil seal with MP grease.
| 2. INSTALL FRONT OIL PUMP BODY O-RING |
![]() |
Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.
| 3. INSTALL FRONT OIL PUMP DRIVEN GEAR |
![]() |
Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.
| 4. INSTALL FRONT OIL PUMP DRIVE GEAR |
![]() |
Coat the front oil pump drive gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.
| 5. INSTALL STATOR SHAFT ASSEMBLY |
![]() |
Align each knock pin of the stator shaft assembly with the holes in the front oil pump and gear body sub-assembly and install the stator shaft assembly to the front oil pump and gear body sub-assembly.
Using a T30 "TORX" socket wrench, install the 16 bolts.
| Bolt | Length (mm (in.)) |
| (A) | 14 (0.551) |
| (B) | 26 (1.02) |
| 6. INSPECT FRONT OIL PUMP ASSEMBLY |
![]() |
Turn the front oil pump drive gear with 2 screwdrivers and check that it rotates smoothly.