Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RESET SWITCH

TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL TIRE PRESSURE WARNING RESET SWITCH


    C305793
  1. Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel sub-assembly.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B380942
  1. Connect the connector.

  1. Engage the glove compartment light as shown in the illustration.

  1. Engage the clamp.



    B380940
  1. Engage the guide and 2 clips.

  1. Install the lower instrument panel sub-assembly with the 5 screws <C> or <D>.



3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
(Click here)


4. INSPECT TIRE PRESSURE WARNING SYSTEM
(Click here)