Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RESET SWITCH

TIRE PRESSURE WARNING RESET SWITCH > REMOVAL

for Preparation Click here



1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
(Click here)


2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B380937
  1. Remove the 2 screws <C> or <D>.

  1. Open the lower instrument panel door.



    B403739
  1. Remove the 3 screws <C> or <D>.



    B380939
  1. Disengage the 2 clips and guide as shown in the illustration.



    B380941
  1. Disengage the clamp.

  1. Disengage the glove compartment light as shown in the illustration.

  1. Disconnect the connector and remove the lower instrument panel sub-assembly.



3. REMOVE TIRE PRESSURE WARNING RESET SWITCH


    C305793
  1. Disengage the 2 claws to remove the tire pressure warning reset switch from the lower instrument panel sub-assembly.