BLOWER UNIT (for TMC, TMMR Made) > DISASSEMBLY |
| 1. REMOVE AIR DUCT SUB-ASSEMBLY |
![]() |
Disengage the 4 claws and remove the air duct sub-assembly.
| 2. REMOVE AIR FILTER COVER PLATE |
![]() |
Disengage the 2 claws and remove the air filter cover plate.
| 3. REMOVE CLEAN AIR FILTER |
![]() |
Remove the clean air filter as shown in the illustration.
| 4. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY |
![]() |
Remove the 3 screws and No. 1 blower damper servo sub-assembly.
| 5. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
![]() |
Remove the 3 screws and blower motor with fan sub-assembly.