BLOWER UNIT (for TMC, TMMR Made) > REASSEMBLY |
| 1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
Install the blower motor with fan sub-assembly with the 3 screws.
| 2. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY |
Install the No. 1 blower damper servo sub-assembly with the 3 screws.
| 3. INSTALL CLEAN AIR FILTER |
![]() |
Install the clean air filter as shown in the illustration.
| 4. INSTALL AIR FILTER COVER PLATE |
Engage the 2 claws to install the air filter cover plate.
| 5. INSTALL AIR DUCT SUB-ASSEMBLY |
Engage the 4 claws to install the air duct sub-assembly.