AMBIENT TEMPERATURE SENSOR > REMOVAL |
| 1. REMOVE COOL AIR INTAKE DUCT SEAL (for TMC, TMMR Made) |
![]() |
Remove the 9 clips and cool air intake duct seal.
| 2. REMOVE COOL AIR INTAKE DUCT SEAL (for TMMK Made) |
![]() |
Remove the 9 clips and cool air intake duct seal.
| 3. REMOVE AMBIENT TEMPERATURE SENSOR (THERMISTOR ASSEMBLY) |
![]() |
Disconnect the connector.
Disengage the clamp to remove the ambient temperature sensor (thermistor assembly).