COMPRESSOR (for 2AR-FE) > REMOVAL |
| 1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM (for TMC, TMMR Made) |
Turn the A/C switch on.
Operate the air conditioning with a set temperature of 25°C (77°F) and the blower at low for 10 minutes to circulate the refrigerant. This causes most of the compressor oil from the various components of the air conditioning system to collect in the air conditioning compressor.
Turn the ignition switch off.
Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.
| 2. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM (for TMMK Made) |
Turn the A/C switch on.
Operate the air conditioning with a set temperature of 25°C (77°F) and the blower at low for 10 minutes to circulate the refrigerant. This causes most of the compressor oil from the various components of the air conditioning system to collect in the air conditioning compressor.
Turn the ignition switch off.
Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.
| 3. REMOVE RADIATOR ASSEMBLY |
| 4. REMOVE V-RIBBED BELT |
| 5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE |
![]() |
Remove the bolt.
Disconnect the 2 connectors.
![]() |
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with pulley.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
| 6. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE (for TMC, TMMR Made) |
![]() |
Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor assembly with pulley.
Remove the O-ring from the No. 1 cooler refrigerant suction hose.
| 7. DISCONNECT SUCTION HOSE SUB-ASSEMBLY (for TMMK Made) |
![]() |
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.
Remove the O-ring from the suction hose sub-assembly.
| 8. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY |
![]() |
Remove the 2 bolts and 2 nuts.
![]() |
Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.