VALVE BODY ASSEMBLY > REASSEMBLY |
| 1. INSTALL SHIFT SOLENOID VALVE SL4 |
Coat the shift solenoid valve SL4 with ATF.
![]() |
Install the shift solenoid valve SL4 and No. 4 solenoid lock plate to the transmission valve body assembly with the bolt.
| *1 | No. 4 Solenoid Lock Plate |
| *2 | Shift Solenoid Valve SL4 |
| 2. INSTALL SHIFT SOLENOID VALVE SL3 |
Coat the shift solenoid valve SL3 with ATF.
![]() |
Install the shift solenoid valve SL3 and No. 3 solenoid lock plate to the transmission valve body assembly with the bolt.
| *1 | No. 3 Solenoid Lock Plate |
| *2 | Shift Solenoid Valve SL3 |
| 3. INSTALL SHIFT SOLENOID VALVE SLU |
Coat the shift solenoid valve SLU with ATF.
![]() |
Install the shift solenoid valve SLU to the transmission valve body assembly.
| *1 | Shift Solenoid Valve SLU |
| 4. INSTALL SHIFT SOLENOID VALVE SLT |
Coat the shift solenoid valve SLT with ATF.
![]() |
Install the shift solenoid valve SLT and solenoid lock plate to the transmission valve body assembly with the bolt.
| *1 | Solenoid Lock Plate |
| *2 | Shift Solenoid Valve SLT |
| 5. INSTALL SHIFT SOLENOID VALVE SL1 |
Coat the shift solenoid valve SL1 with ATF.
![]() |
Install the shift solenoid valve SL1 to the transmission valve body assembly.
| *1 | Shift Solenoid Valve SL1 |
| 6. INSTALL SHIFT SOLENOID VALVE SL2 |
Coat the shift solenoid valve SL2 with ATF.
![]() |
Install the shift solenoid valve SL2, clamp and No. 2 solenoid lock plate to the transmission valve body assembly with the 2 bolts.
| *1 | Clamp |
| *2 | No. 2 Solenoid Lock Plate |
| *3 | Shift Solenoid Valve SL2 |
| 7. INSTALL SHIFT SOLENOID VALVE SL |
Coat the shift solenoid valve SL with ATF.
![]() |
Install the shift solenoid valve SL to the transmission valve body assembly with the bolt.
| *1 | Shift Solenoid Valve SL |
| 8. INSTALL TRANSMISSION WIRE |
Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.
Coat the temperature sensor with ATF.
Connect the temperature sensor and install the lock plate with the bolt to the transmission valve body assembly.
Engage the clamp.
Connect the 7 shift solenoid valve connectors.
Connect the transmission revolution sensor connector.
| 9. INSTALL TRANSMISSION REVOLUTION SENSOR |
![]() |
Temporarily install the transmission revolution sensor to the transmission valve body assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Connect the transmission revolution sensor connector.